| |
Component and Model Documentation
|
|
|
Actives | Passives | Parasitics | Analysis | Sources (Dependent, Independent, and Ports)
|
adsLib Components
|
|
|
Introduction (BinModel, Gnd, Port, Term, Var) | Lumped Components | Miscellaneous (chip cap, ideal inductor, transformer) | Probe Components | Linear Data File Components | Equation-Based Linear Components
|
|
|
Controlled | Frequency Domain | Modulated | Noise | Time Domain
|
|
|
Modulated-DSP-based sources
|
|
|
Diodes | BJTs | GaAs | JFET | MOS | Linear Devices | Equation-Based Nonlinear Components
|
|
|
Finline Components | Microstrip Components | Multilayer Interconnects | Passive RF Circuit Components | Stripline Components | Suspended Substrate Components | Transmission Line Components | Waveguide Components | Printed Circuit Board Components
|
|
|
Amplifiers and Mixers | Filters | Modulators and Demodulators | Passive System Components | Phase Lock Loop Components | Switch and Algorithmic Components | TX/RX Subsystems | System Data Models
|
|
|
Modifying the Cadence library database by adding ADS simulation information to the Component Description Format (CDF) and creating an ADS Cellview for each library component. Includes information on creating model files, formatted for ADS, that contain model parameters for each component.
|
|
|
Verifying that design kit results from the ADS simulator match the output from other simulators such as Hspice and/or Spectre.
|
