Descriptions of examples using Advanced Design System to create real-life designs.
Communication Systems
|
Examples of how cosimulation between DSP and RF/Analog tools can be used to create real circuits and electromagnetic propagation models to enhance system-level performance. |
Connected Solutions
|
Examples of the basic functions of the Sequencer controller and the concept of 3GPP and WLAN Connected Solution BER measurements.
|
Design Kit
|
Examples of the use of a design kit within ADS, including a tutorial demonstration of a design kit architecture.
|
Digital Signal Processing
|
Examples of how DSP tools and the extensive element and design libraries can be used to address complex digital signal processing tasks.
|
Instruments
|
Example of how to use an instrument component to acquire data.
|
Behavioral Models
|
Examples of how reduced-order models of amplifiers, mixers, modulators, and demodulators used as building blocks in receivers and transmitters enable fast and accurate system level simulations that cannot be completed at the circuit level.
|
Momentum
|
Examples on how to evaluate and design modern communications systems for RF and microwave antennas and circuits. Also includes examples on optimization of geometry parameters to achieve optimal structures that meet circuit and device performance goals.
|
Microwave Circuits
|
Examples of how to create and analyze microwave, hybrid, and MMIC design solutions and applications such as amplifiers, filters, mixers, oscillators, and subsystems.
|
Ptolemy Doc Examples
|
Examples of how the theoretical BER performance in an Additive White Gaussian Noise environment can be achieved for various modulation types.
|
RF Board
|
Examples of how to design and translate into physical reality complex circuits such as phase-locked loops, AGCs, and power amplifiers.
|
RFIC
|
Examples of how to solve problems in the time, frequency, and modulation domains to design high-performance, low-cost RF integrated circuits.
|
RF System In Package (SiP)
|
Examples of how to create RF System-in-Package (or Module) designs in ADS.
|
SDFHDLCoSim
|
Example of how to run a Synchronous Data Flow and HDL co-simulation using Agilent Ptolemy and the ModelSim SE simulator.
|
Timed
|
Examples that can be used as templates for simulating an RF AGC loop and an RF receiver for recovering 3GPP CPICH symbols and carrier frequency using a multi-rate PLL.
|
Tutorial
|
Examples of basic usage and functionality concepts in the tutorials included with the documentation.
|
